Golden Lighting 6005-ND3 RBZ - Manual (Page 2)

Fixture Name: Lancaster 6005-ND3 PW/RBZ/AB
For Customer Service, contact the place of purchase to arrange for replacement parts.
7. Slip Canopy Loop Collar (H) over the chain, then do the
same with the Canopy (G).
8. When ready to complete the installation, use the
remaining chain connector and attach the loose end of the
chain to the Canopy Loop (F). Close the chain connector.
9. Make sure the weight of the chandelier will be supported
by the chain - not the electrical wire.
* You may now install the fixture.
4. By measuring, determine correct number of links needed
for proper hanging height. Use a pair of pliers to open one
link of the Chain (K) then remove the excess Chain (K) and
discard it.
5. Use a chain connector (L) to attach one end of the chain
to the Top Loop (J) and close the chain connector.
6. Feed the fixture wires through the Chain (every three
links) and pull the wires until taut.
Fig. 2
Note: Complete these remaining steps after the fixture is
hung.
10. Place the Glass Shades (O) over the Threaded Sockets
(N). Secure the Glass Shades (O) by threading the Socket
Rings (Q) over the socket washers (P) until tight.
11. Install the light bulbs in accordance with the fixture's
specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
PARTS & ASSEMBLY SHEET
D
C
D
C
6005-ND3PartsInstallation_111004m.xls Page 2