Golden Lighting 6005-M1L RBZ - Manual (Page 2)

6005-M1LPartsInstallation_111004m.xls Page 2
PARTS & ASSEMBLY SHEET
Fixture Name: Lancaster 6005-M1L PW/RBZ/AB
For Customer Service, contact the place of purchase to arrange for replacement parts.
8. By measuring, determine correct number of links needed
for proper hanging height. Use a pair of pliers to open one
link of the Chain (K) then remove the excess Chain (K) and
discard it.
9. Use a chain connector (J) to attach one end of the chain
to the Top Loop (L). Close the chain connector.
10. Feed the fixture wires through the Chain (every three
links) and pull the wires until taut.
11. Slip Canopy (H) over the chain.
12. When ready to complete the installation, use remaining
chain connector to attach the loose end of chain to the
Canopy Loop (I). Close the chain connector.
13. Make sure the weight of the chandelier will be supported
by the chain - not the electrical wire.
* You may now install the fixture.
ASSEMBLING THE FIXTURE (Fig.2)
4. Pull the fixture’s wire through the Rods until taut.
5. Thread Rod (N) into frame until tight.
6. Thread additional Rods (N) together using the Nipple (M)
between rods until tight. Repeat for any additional rods.
7. Feed the fixture wires through the Top Loop (L) and pull
the wires until taut. Then, screw the Top loop (L) to the rod
on the top of fixture until tight.
Fig. 2
14. Place the glass shade (O) over the threaded socket (N).
Secure by threading the Socket Ring (Q) over the socket
washer (P) until tight.
15. Install the light bulb in accordance with the fixture’s
specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
D
A
C
B
E
F
H
G
I
J
K
L
M
N
N
O
P
Q