Golden Lighting 6005-BA2 RBZ User Manual
Ki l h j, Parts & assembly sheet, Parts list
Mounting
Strap
Junction Box
Screw
Mounting
Screw
1ea 4" X 3"
2ea 8/32" X 1"
2ea 5/32" X 28mm
Wire
Connnector
Hex Nut
Deco Nut
(round nut)
2ea P2 Orange
2ea 5/32" X 3.5mm
2ea 9 X 9.5mm
Green Ground
Screw
Socket Ring
(AB only)
Socket Ring
(PW, RBZ only)
1ea 8/32" X 10mm
2ea 51 x 23mm
2ea 50 x 9mm
Part Needed
Quantity
Part Needed
Quantity
Reason why
(missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Landcaster 6005-BA2 PW/RBZ/AB
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing
or damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
For Customer Service, contact the place of purchase to arrange for replacement parts.
6005-BA2
Read and review installation instruction sheet
before assembling the fixture.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
NOTE: I
NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
1. Slide the Glass Shade (H) over Socket (I). Secure
Glass Shade (H) by threading the Socket Ring (J) on
to Socket (I) until tight.
Repeat for remaining glass shade.
2. Install light bulbs in accordance with fixture's
specifications.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
Fig. 1
K
I
L
H
J
6005-BA2PartsInstallation_111004m.xls
Page 1