Golden Lighting 3711-3P CB User Manual
Parts & assembly sheet, Parts list

1ea ∅6-1/2"*H1-1/2"
2ea 8#32-IP*1"
1ea 1/8-IP*H60mm
1ea 6ft ∅3.8
3ea P3 Orange
1ea 1/4-IP*H60mm
2ea ∅5.8*H61mm
1ea ∅1-1/8"*H42mm
1ea W4-1/8"*E1"*H5mm
1ea 1/8-IP*H145mm
2ea 1-1/2-IP*H2mm
2ea 1-1/2-IP*H2mm
1ea ∅2-1/4"*H36mm
1ea 1/8-IP*H4mm
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
Finial
Read and review installation instruction sheet before
assembling the fixture.
1ea 1/8-27-IP*H32mm
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Hex Nut
Bottom cap
2488-3P FI & 3711-3P CB
Nipple
Metal washer
Plastic washer
Chain connector
Canopy loop
with Collar
Mounting strap
PARTS & ASSEMBLY SHEET
Fixture Name:
Rockefeller 2488-3P FI & 3711-3P CB
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Canopy
Mounting Screws
Top loop
Chain
Wire connectors
Nipple
Fig 1
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
For Customer Service, contact the place of purchase to arrange for replacement parts.
ASSEMBLING THE FIXTURE (Fig.1)
1. Feed the fixture wires through the Top loop (J) and pull the
wires until taut.
2.Then screw the Top Loop (J) to the threaded center column
of Frame (M) until tight.
24883711-PartsInstallation_20110105m.xls