Golden Lighting 3281-5 BI - Manual (Page 2)

Fig 4
For Customer Service, contact the place of purchase to arrange for replacement parts.
ASSEMBLING THE FIXTURE (Fig. 2)
3. Measure to determine the correct number of links
needed for proper hanging height. Use a pair of pliers
to open one link of Chain (K) then remove and discard
the excess chain.
4. Use one Chain Connector (L) to attach one end of
the chain to Top Loop (J) and close the chain
connector.
5. Feed the fixture wires through the Chain (every
three links) and pull the wires until taut.
6. Slip Canopy Loop Collar (H) over the chain, then do
the same with Canopy (G).
7. When ready to complete the installation, use the
other chain connector to attach the other end of the
chain to the Canopy Loop (F) and close the chain
connector.
8. Make sure the weight of the chandelier will be
supported by the chain and not by the electrical wire.
* You may now install the fixture.
Note: Complete the remaining steps after the fixture is
hung.
9. Place Candle Sleeve (M) over Socket (O).
10. Install the light bulbs in accordance with the
fixture's
specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
PARTS & ASSEMBLY SHEET
Fixture Name: Moreno 3281-5 BI
Fig 2