Golden Lighting 3030-BA4 CH User Manual
Parts & assembly sheet, Parts list
Anchor
2 ea
Ø
6*H15mm
Junction Box
Screw
#8-32N*25mm
Green Ground
Screw
1 ea
#8-32n*10mm
Deco Nut
2 ea
Ø 8"*H8mm
Wire Connector
3 ea
P3
Spacer
4 ea
Ø
2
5*H26mm
Xenon Bulb
4 ea 14*13*44MM
Socket Tool
1 eaΦ28*127MM
Screw
Φ4*25MM
2ea
Part Needed
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
3030-BA4 CH
Read and review installation instruction sheet
before assembling the fixture.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
Fig. 4
1. Attach Front Plate (F) onto the Mounting
Screws (D) located at center line of
Mounting Plate (B) and secure them together
by threading Deco Nut (I) onto Front Plate (F).
2. Slide Outer Glass Shade (H) over Socket (G). (Note:
The gap at the bottom of the glass should be turned
toward the inside) Slide Inner Glass Shade (J) and
Spacer (K) over Socket (G) . Secure Glass Shades (H),
(J), and Spacer (K), in place using Socket Tool (N) to
thread Socket Ring (L) onto Socket (G) until tight.
4. Install the Light Bulb (M) in accordance with
the fixture's specifications .
(DO NOT EXCEED THE MAXIMUM WATTAGE
RATING!)
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Vanora 3030-BA4 CH
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note on this sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
220V 25W
G9
N
F
M
L
K
J
I
H
G