beautypg.com

Golden Lighting 2081-9 CH User Manual

Parts & assembly sheet, Parts list

background image

Mounting Strap

1 ea

4"*3"*H1.5mm

Canopy

1 ea

Φ115*19MM

Swivel Joint

1 ea

3/8"*H57mm

Hex Nut

2ea

3/8"*H4MM

Spring Washer

2 ea

15*H3MM

Green Ground

Screw

1 ea

#8-32n*10mm

Deco Nut

2 ea

5/32"*9mm

Rod

3 ea
Ø

1/2"*H12"

Rod

1 ea
Ø

1/2"*H6"

Glass Finial

1 ea

3/8"*H8mm

Xenon Bulb

1 ea

14*13*44MM

Spacer
3 ea
Ø25*H26mm

Mounting Screw

2 ea

5/32"*28mm

Junction Box

Screw

2ea

#8-32N*25mm

Wire Connector

3 ea

P3

Wrench

1 ea

28*60MM

Arm

2 ea

308*509MM

Socket Tool

1 ea

Φ28*127MM

Part Needed

Part Needed

Quantity

Reason why

( missing, scratched, broken glass, bent, bad finish)

Comments

Notice:

Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing

or damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________

below to be filled out by retailer

PARTS & ASSEMBLY SHEET

This fixture assembled PO:__________ Date: ________

Fixture Name: Baxley 2081-9 CH

2081-9 CH

Read and review installation instruction sheet before

assembling the fixture.

F

IXTURE

A

SSEMBLY

I

NSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

1. Secure Arms (P) to Housing (V) by using Wrench (W),

at the top and the bottom of the fixture, to attach Spring

Washer (U) and Hex Nut (T). For the bottom assembly,

tighten the Housing Cover (R) to Housing (V) with Finial (S).

For the top assembly, tighten Housing Cover (R) to

Housing (V) with Check Ring (X).

2. For adjusting the hanging height of the fixture, this carton

contains quantity 3, 12" rods and quantity 1, 6" rod. First,

decide the height required and thread the wires through Rods

(H). Then connect Rods (H) and Threaded Rod Nipples (I)

together. Pull the fixture wires until taut.

3. Connect the assembled Rods (H) to Fixture Frame (J).

4. Connect Threaded Rod Nipple (I) to Swivel Joint (G).

DO NOT EXCEED THE MAXIMUM WATTAGE RATING

Fig. 4

V

T

R

S

U

W

J

H

I

F

G

E

V

R

X

P

Table of contents