Golden Lighting 2049-M1L FB - Manual (Page 2)

PARTS & ASSEMBLY SHEET
Fixture Name: Valencia 2049-M1L FB
Fig 2
For Customer Service, contact the place of purchase to arrange for replacement parts.
ASSEMBLING THE FIXTURE (Fig. 2)
4. By measuring determine correct number of
links needed for proper hanging height. Use a
pair of pliers to open one link of the Chain then
remove the excess Chain and discard it.
5. Use one chain connector to attach one end of
the chain to the Top loop (J) and close the chain
connector.
6. Feed the fixture wires through the Chain
(every three links) and pull the wires until taut.
7. Slip Canopy loop collar over the chain, then
do the same with the canopy.
8. When ready to complete the installation Use
the other chain connector and attach the other
end of the chain to the canopy loop and close
the chain connector.
9. Make sure the weight of the fixture is
supported by the chain-not the electrical wire.
*You may now hang the fixture
10. Install the light bulb in accordance with the
fixture's specifications.
DO NOT EXCEED MAXIMUM WATTAGE
RATING
!
G
CHAIN
H
F
E
J
K
L