Golden Lighting 1648-M3 BUS - Manual

Mounting strap Mounting Screw Mounting screw
1ea 4" 2ea 8/32"X28mm 2ea 8/32X1"
Wire connnector Hex Nut
Deco nut (round
nut)
3ea P4 Orange 2ea 8/32"X3.5mm 2ea @12mm
Canopy Rod Rod
1ea 130 Dia*H70mm 3ea 12.7mmDia* H12“ 1ea 12.7mmDia* H6”
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
Fixture Name: Olympia 1648-M3 BUS
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
1648-M3 BUS
1. Unfold the arms of the fixture body to proper locations.
2. Thread the Center column (M) onto the protruding
nipple at bottom center of the fixture Top cap (L).
3. Thread the nipple (N) into the bottom coupler of Center
column (M).
Fig. 1
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
For Customer Service, contact the place of purchase to arrange for replacement parts.