Golden Lighting 1648-1W BUS User Manual
Parts & assembly sheet, Parts list
Mounting strap
Mounting Screw
Mounting screw
1ea 4"
2ea 8/32"X28mm
2ea 8/32X1"
Wire connnector
Hex Nut
Deco nut
(round nut)
3ea P4 Orange
2ea 8/32"X3.5mm
2ea @12mm
Green Ground
screw
1ea 8/32"X10mm
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
1648-1W BUS
Read and review installation instruction sheet before
assembling the fixture.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
1. Slide the glass shade (K) and candle sleeves (L) over
the socket of fixture body (M).
2. Carefully press the clips inside of the shade (K) onto
the bulb.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
Fig. 4
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Olympia 1648-1W BUS
Bulb
(Not Provided)
K
J
H
M
L