Golden Lighting 1425-M1L WG - Manual (Page 2)

For Customer Service, contact the place of purchase to arrange for replacement parts.
3. By measuring, determine correct number of links
needed for proper hanging height. To remove any
excess chain, use a pair of pliers to open one link of
Chain (K) and discard the excess chain.
4. Use one Chain Connector (L) to attach one end of
the chain to Top Loop (J). Then close the chain
connector.
5. Feed the fixture wires through the chain (every three
links) and pull the wires until taut.
6. Slip Canopy Loop Collar (H) over the chain, then do
the same with the Canopy (G).
7. When ready to complete the installation, use the
other chain connector and attach the other end of the
chain to the Canopy Loop (H). Then close the chain
connector.
8. Feed the fixture wires through Canopy Loop (F) and
Nipple (C) and pull until taut.
* You may now install the fixture.
Fig 2
PARTS & ASSEMBLY SHEET
Fixture Name: Sancerre 1425-M1L WG