Golden Lighting 1264-3P PW - Manual

Canopy
1ea
Mounting
Screws
2ea Spacer 1ea
Chain 6ft Wire connectors 2ea Bottom cap 1ea
Chain connector 2ea
Canopy loop
and Canopy
loop collar
1ea Nipple 2ea
Mounting Strap 1ea Hex Nut 2ea Finial 1ea
Green screws 1ea Rubber washer 1ea Metal washer 1ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
1. Thread the Center column (C) onto the Socket
Assembly (E) at the coupler (D).
2. Feed the fixture wires through the Top loop (A)
and pull the wires until taut.
3. Then screw the Top Loop (A) onto the Nipple (B)
until tight.
1264-3P PW/RBZ
Read and review installation instruction sheet before
assembling the fixture.
Fig 1
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Grace 1264-3P PW / RBZ
A
B
C
D
E