Golden Lighting 1089-M1L RSB-PRL - Manual (Page 2)

For Customer Service, contact the place of purchase to arrange for replacement parts.
8. Slip Canopy Loop Collar (H) over the chain, then do the
same with the Canopy (G).
9. When ready to complete the installation, use the other
chain connector and attach the other end of the chain to the
Canopy Loop (F). Then, close the chain connector.
10. Make sure the weight of the chandelier will be supported
by the chain-not the electrical wire.
* You may now install the fixture.
ASSEMBLING THE FIXTURE (Fig.2)
4. Pull the fixture’s wire through the rods until taut.
5. Thread Rod (O) into Frame (M) until tight.
6. Thread additional Rods (O) together using Couplers (N)
between rods until tight. Repeat for any additional rods.
7. Feed the fixture wires through Top Loop (J) and pull the
wires until taut. Screw Top Loop (J) to the rod on the top of
the fixture until tight.
Fig 2
Note: Complete these remaining steps after the fixture is
hung.
11. Slide Glass Shade (P) over the socket of Frame (M) and
secure Glass Shade (P) by threading Socket Ring (Q) onto
the socket of Frame (M) until tight.
12. Install the light bulb (not provided) in accordance with the
fixture's specifications.
DO NOT EXCEED MAXIMUM WATTAGE RATING)
PARTS & ASSEMBLY SHEET
Fixture Name: Pemberly Court 1089-M1RSB-PRL
C
D