Golden Lighting 1051-FM SBZ - Manual (Page 2)

CONNECTING THE WIRES (Fig 2)
5. Attach the power supply wires to the fixture lead wires
by connecting BLACK to BLACK (or SMOOTH) and
WHITE to WHITE (or RIBBED). 6. Attach the
GROUND wire(GREEN or COPPER) from the Junction
Box and the fixture Ground wire to the green Ground
Screw on the Mounting Bracket (B) or connect both
wires together using the correct size of wire connectors. -
NOTE:Twist the wires together in the same direction you
twist the wire connector onto the wires.
7. Tuck these wire connections neatly into the Junction
Box.
Fig. 2
FINISHING THE INSTALLATION (Fig.3)
8. Finish mounting the Ceiling Pan (D) by placing it over
the Mounting Strap (B) as shown on FIG.1. Rotate the
Pan until the Mounting screws (A) protrude through the
“Keyholes” located in the bottom of Ceiling Pan (D).
Using a screw driver, secure the Ceiling Pan (D) by
screwing Mounting Screws (A) until taut.
9. Install the light bulbs in accordance to the fixture’s
specifications.
10. Install the glass shade as per the assembly
instructions.
YOUR INSTALLATION IS NOW COMPLETE. RETURN
POWER TO THE JUNCTION BOX AND TEST THE FIXTURE.
Fig. 3
For Customer Service, contact the place of purchase to arrange for replacement parts.
INSTALLATION INSTRUCTIONS
Fixture Name: Hidalgo 1051-FM SBZ
For Flush Mount Light Fixture
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
HANGING THE FIXTURE （Fig.1）
1. Carefully remove the new fixture from the carton and
the yellow bag that holds all parts. Check that all parts
are included as shown in the illustration and parts list.
2. Shut off power at the circuit breaker and remove old
fixture from ceiling, including the old mounting strap.
3. Thread the two Fixture Mounting Screws (A) into the
pre-drilled Hole in the Mounting Strap (B) spaced the
same distance apart as the hole in the Ceiling Pan.
4. Attach Mounting Strap (B) to the junction box using the
two Screws (C).
Fig. 1
D