Parts & assembly sheet, Parts list – Golden Lighting 1035-BA2 CH User Manual

Page 2

Green Ground
Screw
1 ea
#8-32N*H10mm

Junction Box
Screw
2 ea
#8-32N*H25mm

Socket Wrench
1 ea
Φ28*127MM

Wire Connector
3 ea
P3

Bulb Shield

2 ea

Φ26*H50MM

Xenon Bulb

2 ea

14*13*44MM

Part Needed

Quantity

Part Needed

Quantity

Reason why

( missing, scratched, broken glass, bent, bad finish)

Comments

PARTS & ASSEMBLY SHEET

This fixture assembled PO:__________ Date: ________

Fixture Name: Neeva 1035-BA2 CH

Read and review installation instruction sheet before

assembling the fixture.

IXTURE

SSEMBLY

NSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

Notice:

Please review the parts listing and check for all parts before assembling the fixture. If any parts

are missing or damaged, please note on this sheet and contact the place of purchase to arrange for

replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________

below to be filled out by retailer

1035-BA2

Fig. 4

NOTE: I

NSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

1. Place the fixture Front Plate ( H ), over the

Back Plate (B) (shown in Fig. 1), and tighten with Mounting

Screws (A).

2. Slide the Glass Shade (I ) and Spacer (J) over

Socket (G), using Socket Wrench (N) to thread

Socket Ring (L) to Socket (G) until tight.

3. Install Bulb (M) in accordance with the

fixture's specifications .

4. Thread the Bulb Shield (K) to Socket (G).

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)

130V 7