Installation instructions – Golden Lighting 1030-WSC CH User Manual

Page 2

For Wall Mount Light Fixture

INSTALLATION INSTRUCTIONS

WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.

Fixture Name: Cerchi 1030-WSC CH

For Customer Service, contact the place of purchase to arrange for replacement parts.

Fig. 3

Fig. 1

Fig. 2

HANGING THE FIXTURE (Fig.1)

1. Carefully remove the new fixture from the carton and the yellow

bag that holes all your parts. Check that all parts are included as

shown in the illustration and parts list.

2. Shut off power at the circuit breaker and remove the old fixture

from wall, including the old mounting strap.

3. The Mounting Strap (A) contains several pairs of threaded

holes, find the pair of holes that match the holes spacing in your

fixture Back plate (H) and thread the two Mounting screws (B) half

way into the Mounting strap (A).

4. Place the Mounting strap (A)over the Junction Box so the

Mounting screws (B) are vertical or horizontal, as required by

fixture type.

5. Attach the Mounting strap (A) to the Junction box using the two

Mounting screws (D). Tighten the screws (D) securely with screw dr

CONNECTING THE WIRES (Fig 2)

6. Attach the power supply wires to the fixture lead wires by

connecting BLACK to BLACK (or SMOOTH) and WHITE to

WHITE (or RIBBED).

7. Attach the GROUND wire(GREEN or COPPER) from the

Junction Box and the fixture Ground wire to the green Ground

Screw on the Mounting Bracket (A) or connect both wires together

using the correct size of wire connectors.

NOTE: Twist the wires together in the same direction you twist the

wire connector onto the wires.

8. Tuck these wire connections neatly into the Junction Box.

FINISHING THE INSTALLATION (Fig.3)

9. Place the fixture Back Plate ( H ), over the Mounting Screws(B),

so it protrude through the holes in the Back Plate ( H ).

10. Thread the Deco Nuts (O ) onto the Mounting Screws (B) and

continue turning until the Back Plate (H) is snug against the wall.

11. Install the light bulb and shade as per the fixture assembly

sheet.

YOUR INSTALLATION IS NOW COMPLETE. RETURN POWER

TO THE JUNCTION BOX AND TEST THE FIXTURE.

JUNCTION BOX

HOUSE WIRES

WHITE

BLACK

RIBBED (WHITE)

SMOOTH (BLACK)

FIXTURE WIRES