Galaxy Audio DS-SP24 - Manual (Page 12)

If you wish to proceed press “ENTER” again and the DS-SP24 will go ahead with the “Set Program
Name” page and the subsequent overwrite on completion of the previously described storing
process.
Note: At any time it is possible to quit the storing action by pressing the “ESC” button.
– Delete a Program: this page allows you to delete a preset already stored in the DS-SP24
memory:
By pressing the ENTER button and rotating the “PM2” or “PM3” encoder, it is possible to scroll
through the previously saved presets and the available empty locations (identified by “Empty
Memory”).
If no user presets are stored, the “Delete a Program” screen will show empty memory locations for
all 1-24 presets as shown in the example below for location 10:
If Presets are available they will be shown in the “Delete a Program” page as follows:
By using the “PM2” or “PM3” encoder it is possible to select a preset to be deleted.
Pressing the “ENTER” button on a selected preset will bring up the “[Enter] to Delete.”page
Showing the selected preset.
For example, if we want to delete the preset 10, “Stage 1 2x2”, the screen will be the following:
Confirming the deletion by pressing “ENTER” again, will force the DS-SP24 to erase the selected
preset and the following transitory screen will appear:
Once the preset is deleted, the above screen will disappear returning to the following screen:
PROGRAM UTILITY
- Delete a Program -
Delete a Program
10: Empty Memory
Delete a Program
- 10: Stage 1 2x2 -
[ENTER] to Delete
10: Stage 1 2x2
Erasing Xover Memory. . . . .
10: Stage 1 2x2
PROGRAM UTILITY
Delete a Program
11