Galaxy Audio CHECK MATE CM-160 - Manual (Page 19)

When you have a Sound Level DATA LOGGER meter connected to a
PC and select "Data Logger" from main menu or click from the tool
bar recorded data will be downloaded from the meter and there will be a
progress indicator to show the loading progress. If an error occurs, click
"Data Logger" again.
After the data is loaded, the left hand side will show how many data
sets were loaded and detailed information for each data set (start date,
start time, recording rate, and record numbers).
The first data set will be transferred to the graph and the tabular on the
right hand side every time after recorded data has been downloaded from
the Sound Level Meter. Click any data set to select that set for the graph.
On the right hand side is the waveform graph and statistics for the data set
that is chosen.
Ÿ Tutorial - Quick Start to Use SE322 Test Link
(1.) Recording real time data in waveform.
1. Power on the Sound Level Meter and connect it to a
USB port with the USB cable.
2. Start the SE322 program.