Cisco 12 SP+ - Manual (Page 33)

42-33
Cisco CallManager Administration Guide
78-13310-01
Chapter 42 Cisco IP Phone Configuration
Configuring Directory Numbers
Calling Search Space Choose the appropriate calling search space. A calling
search space comprises a collection of partitions that are
searched for numbers called from this directory number.
The value you choose applies to all devices using this
directory number.
Changes cause update of the numbers listed in the Call
Pickup Group field.
Call Waiting Choose the appropriate call-waiting settings. This field
determines whether this directory number uses call
waiting when a line is busy (On), responds with a busy
signal (Off), or uses the system-wide default setting
(Default).
The value you choose applies to all devices using this
directory number.
Active Auto Answer
for this Directory
Number Check the check box to enable the user to answer calls
automatically when the user enables the headset button
on the Cisco IP Phone 7960/7940.
You cannot activate auto answer for a directory number
with a shared line appearance. The Cisco CallManager
automatically unchecks and disables this check box if
you are configuring a directory number with a shared line
appearance.
Call Pickup Group Choose the number that can be dialed to answer calls to
this directory number (in the specified partition).
Forward All Enter the directory number to which all calls are
forwarded. You can enter any dialable phone number,
including an outside destination.
The value you enter applies to all devices using this
directory number.
Table 42-3 Directory Number Configuration Settings (continued)
Field Description