Philips VR 337 - Manual (Page 43)

Note:
* If you have not yet set the time/date and the
display language as described in Chapter 2,
'INSTALLATION', turn to that chapter to do so.
Switching the built-in modulator on or off
In the last section we talked about interference that
could occur on the television. If you cannot eliminate
picture or sound interference using the above method
you can switch off the built-in modulator.
You can only do this if you have connected the video
recorder to the TV set using an AV-Euro cable.
H//nT/l n OTn n nit 1
1 IU±IUI-. 1 1 1 u l\ W tl
O
Press thpl KASSEffTlanH I PAUSE / STOP II ■ I
buttons on the video recorder simultaneously. The
switch's current position will appear in the display
as 'MODULATOR O N ' .
O Press the I kassette l a n d i pause / stop ii ■ I
buttons simultaneously again for more than five
seconds. This will switch to 'MODULATOR O F F ' .
Switch the modulator back on in the same way.
40