Philips VR 337 - Manual (Page 23)

iji I n //Oil C I”/ /
I U I lUU' _f O//
r TnnrTi
_( ' ui' /_ X(
O Identify the TV channel to which you are tuned.
Use the digit buttons LQ:i9.lto select or change the
'aerial code' for ShowView . You will find a code
table in your TV guide .
If necessary, you can clear with button L
loschei CI .
O Confirm with button I OK Ion the remote control.
'STORED' will appear briefly in the display.
O The video recorder will now display the next
programme number, 'P 02'. Repeat steps Oto O
until you have numbered all the TV channels.
If you wish to delete a TV channel, for instance, if
the picture quality is too poor, press the I
loschein T
button instead of I
ok
l(stnp O).
O When you have finished, press the L
sender ordimeim
button on your video recorder.
Note:
* Unused (free) programme numbers cannot be
selected.
* By pressing the I vPS ~1 button you can display the
name of the TV channel, e.g.: BBC1, while you are
allocating the channel numbers. Of course, the
name can only be displayed when it is indeed being
transmitted by the TV station.
* If a TV station broadcasts encoded programmes
and your video recorder is connected to a decoder,
press thpil DEKODER Ihiittnn on the remote control
at step O • 'DECODER' appears in the display.
The video recorder will activate the decoder
function from now on when you select this TV
channel number (= this programme number).
20