Philips VR 337 - Manual (Page 19)

Searching for a tape position
Sometimes you may have recorded two or more TV
programmes on one cassette.
So that you do not have to spend time searching, your
video recorder offers you an automatic search facility.
The video recorder marks the tape with code marks
every time you start to record. You can search for these
code marks on the tape using thn I
index
«»- land
I INDEX -^hiittnns on your remote control.
O
Press the I
index
INDEX
I button to select the next code
EH button for the previous code
II /1 I/ 1 n.i~n
/ ML. /\ 1 W —lU
mark or the I
mark.
Either 'NEXT or 'PREVIOUS' will appear in your video
recorder display.
© Once the video recorder finds the code mark it will
automatically switch to playback.
Note:
* When you press any tape transport button (e.g.:
the I WIEDERGABEl^ or I PAUSE / STOP 11 ■ I button)
this search function will be stopped.
* You cannot use this function with recordings
made on another video recorder that does not have
this function.
How do I eliminate picture interference?
Every time a cassette is loaded the video recorder will
automatically set the correct tracking position.
For recordings made on another video recorder you
may be able to improve on the automatic setting as
follows:
H button on your remote
T nnr 1/ ll ll~
1 r\ni_ l\ 1 MU
O Press the I wiedergabe I
control.
O Press thfi I SPUR I button on your remote control.
O Press the I W iedergaben i button as soon as the
playback quality is at its best. This setting will
remain until you remove the cassette.
16