beautypg.com

Glossary – ClearOne comm XAPTM 800 User Manual

Page 137

background image

Glossary

131

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Acoustic Echo Cancellation (AEC) A process in which acoustical echo is

removed from a signal. AEC can be used to remove unwanted signals from mic audio

if the unwanted acoustic signal is available separately as an electronic signal.

Adaptive Ambient This portion of the mixer monitors the varying ambient noise

level in the room and changes the threshold level at which a microphone gates on.

Ambient Level The manually-set background noise level upon which the XAP 800

bases gating protocols. Used only if the Adaptive Ambient feature isn’t used.

Ambient Noise The existing room-level noise, such as that caused by ventilation

systems, paper shuffling, and background chatter.

Amplitude Plot A plot of amplitude (-18 to 18dB) vs. frequency (20Hz to 20kHz)

on a logarithmic scale.

Attack Time This signal parameter determines how quickly compression is enabled.

It is calibrated in milliseconds.

Attenuation A reduction of signal amplitude.

Audio Processor A device that modifies an audio signal in response to certain

requirements.

Audio routing The process of routing input signals (Mics 1–8, Inputs 9-12, From

E-bus, From Processing) to output destinations (Output 1–12, To E-bus, To

Processing) in the Matrix screen.

Automatic Gain Control (AGC) Automatically increases or decreases audio gain

to maintain a consistent audio level.

Automatic Gating Automatically gates microphones on or off based on input levels

and other parameters programmed into the XAP 800.

Auxiliary audio Audio that comes from line level audio sources such as video

codecs, TH2s, and CD players.

Bandwidth The difference between the lower and upper 3dB end points of an audio

band. Also, the range or differences between the limiting frequencies of a continuous

frequency band.

Baud Rate The number of signal transitions per second, or the clock rate of the

serial bit stream in hertz. Given 7 or 8 bits for data plus start and stop, the

approximate ASCII character transmission rate is one-tenth the baud rate.

Glossary