ClearOne comm XAPTM 800 - Manual (Page 116)

110
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
GREPORT - Gate Report
This command selects/reports the gate status.
Command form: DEVICE GREPORT
Argument details
Name Description
Device 0–7 or * to select all units
GREPORT Command form
Value 0 = Off, 1 = On, 2 = Toggle
Example: #53 GREPORT 1 On XAP 800 unit 3 (#53), the gate reporting
(GREPORT) is set to on (1).
GRPSEL - Gating Group Select
This command selects/reports which gating group each input is assigned. There can
only be one selection per input.
Command form: DEVICE GRPSEL [Value]
Argument details
Name Description
Device 0–7 or * to select all units
GRPSEL Command form
Channel 1–8 (selects mic input)
Value 1–4, A–D (selects gating group), Null to return current value
Example: #54 GRPSEL 1 A On XAP 800 unit 4 (#54), mic channel 1 is
assigned to gating group (GRPSEL) A.
LABEL - Label
This selects/reports the label of the specific channel identified in the unit.
Command form: DEVICE
LABEL [In/Out] [String]
Argument details
Name Description
Device 0–7 or * to select all units
LABEL Command form
Channel See Groups and Channels, page 97
Group I, O, M, G, P, L, E, U, W, S, C (see page 97)
In/Out 0 = Output, 1 = Input (For Expansion Bus groups only)
String String of up to 20 characters representing the label text.
Null to query and CLEAR to clear the label
Example: #57 LABEL 1 M WIRELESS On XAP 800 unit 7 (#57), the label
( LABEL) for mic (M) channel 1 is WIRELESS.
Gate report sends a report
on every gate change. If no
mics are gated on, the
report will be sent every 10 seconds.
✍
Appendices ~ Appendix E: Serial Commands