ClearOne comm XAPTM 800 - Manual (Page 132)

126
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
SIGTOUT - Signal Generator Time Out
Sets the signal generator time out for the unit.
Command form: DEVICE
SIGTOUT [Value]
Argument details
Name Description
Device 0–7 or * to select all units
SIGGEN Command
Value 0 = Off, 1–30 = Set time out minutes, Null = Current rate
Example: #57 SIGTOUT 15 On XAP 800 unit 7 (#57), the signal generator
time out (SIGTOUT) is set to 15 minutes.
SLVL - Speech Level Control Enable/Disable
This command selects/reports the setting of speech level control for a microphone.
Command form: DEVICE SLVL [Value]
Argument details
Name Description
Device 0–7 or * to select all units
SLVL Command
Channel 1–8 (select mic input)
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current mode
Example: #50 SLVL 2 M 1 On XAp 400 unit 0 (#50), the speech leveler for
mic (M) channel 2 is set to on (1).
STRING - String Execution
This command sends the specified string out the serial port.
Command form: DEVICE STRING [ID]
Argument details
Name Description
Device 0–7 or * to select all units
STRING Command
ID 0 – 7
Null to query last string in text
Example: #51 STRING 3 On XAP 800 unit 1 (#51), the STRING programmed
into location 3 will be sent out the RS-232 port.
The serial command to
create a string is
PRGSTRING (Program
String). See page 122.
✍