Radio » cassette player, Erasing the memory, Lock – Philips AQ 6549/00 User Manual
Page 6: Playing back cassettes, Auto reverse
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Radio » Cassette Player
ERASING THE MEMORY
Move the 9/10 kHz switch to the other position
and back again.
The memory will now be erased and PRESETS
stations will need to be reprogrammed.
LOCK
Activating LOCK keeps your radio programmes
from being interrupted, should you accidentally
press on TUNING UP 5 / DOWN
5
and or
PRESETS buttons.
• Keep ALARM STOP pressed and then press
MODE once.
- LOCK is now activated.
- LOCK will appear on the display.
• Repeat the above operation to turn off the lock
function.
PLAYING BACK CASSETTES
SetRADlO/TAPEtoTAPE.
Connect the headphones to O.
Open the cassette holder and insert a cassette
with the open part facing the buttons.
Set NORMAL/METAL-CrOz selector to;
- NORMAL for NORMAL (lEC I) cassettes
- METAL-CrOz for CHROME (lEC H) or METAL
(I EC IV) cassettes.
Adjust DOLBY NR □□ (noise reduction) ON or
OFF.
To start playback, press < ►.
During playback you can reverse the tape
direction using •< DIR ►.
Adjust the sound with VOLUME and DBB (bass).
Fast Winding: Press -« or
To stop, press ■ and the set is switched off.
AUTO REVERSE
The tape direction will be automatically reversed
whenever the player reaches the end of the tape.
The cassette will play continuously unless you
press ■ (or until the batteries are exhausted).