Philips AQ 6549/00 - Manual (Page 5)

Radio
AUTOMATIC TUIMIIMG PRESETS
Keep TUNING 5 / 5 pressed until the frequency
on the display keeps changing; then release the
TUNING 5/2 button.
Tuning stops when a strong radio signal has
been found.
If the radio station found is not the desired one,
simply repeat this operation.
MANUAL TUNING
Manual tuning is useful when you already know the
frequency of the transmitter (e.g. from your
programme guide).
• Keep TUNING UP 5 / DOWN 5 pressed.
• As soon as you approach the required radio
frequency, stop tuning by briefly pressing any of
the TUNING buttons.
• Then press TUNING UP 5 or TUNING DOWN 2
briefly until the right frequency has been
reached. In this way the frequency can be
changed step-by-step.
One step is 0.05 MHz (50 kHz) on FM or for North
or South America 0.1 MHz (100 kHz).
The PRESETS buttons allow you to store the
frequencies of up to 20 radio stations in memory
(10 AM or 10 FM stations).
How to preset a radio station
• Select the wave band using FM»AM.
• Using TUNING UP 5 / DOWN 2 tune either
automatically or manually to the radio station to
be stored (as described above).
• To store the radio frequency shown, press
STORE.
• Within 10 seconds, select the desired memory
location using the PRESETS buttons. For the
preset locations '6'...’10', first press '+5' and
after that one of the buttons '1 ’...'5'. The
selected radio station is now stored in memory.
A preset radio station is only erased from the
memory by storing another one in its place.
Selecting PRESETS
• Press the desired PRESETS button. For the
preset locations '6'...'10', first press '+5' and
after that one of the buttons '1 '...'5'.