Philips CD951 - Manual (Page 7)

OPERATION (ID
- C L O S E lights up, followed by READING.
- The number of tracks and the playing time of the CD are
shown on the display.
• Press PLAY/REPLAY to start play.
- The number indicator shows how many tracks are on the
CD; when a track has been played, its number disappears.
- The track being played is always shown under TRACK and
its elapsed playing time is shown under TRACK TIME.
- Play will stop after the last track.
• Press POWER STANDBY/OFF to switch the player off.
NOTE!
- You can also press PLAY/REPLAY immediately after in­
serting the CD; the compartment then closes automatically.
- The CD-compartment also closes when the front is
pressed briefly; playback will then start automatically.
- You can interrupt playback by pressing PAUSE; PAUSE
then lights up. Press PLAY/REPLAY to restart; if you first
press PAUSE again and th en PLAY/REPLAY, the current
track will start again from the beginning.
- If you press PLAY/REPLAY d urin g p lay, the current track
will start again from the beginning.
- You can stop playback by pressing STOP/CP or OPEN/CLOSE.
SELECTING ANOTHER TRACK DURING PLAY (0-9)
• Key in the desired number using the 0-9 digit keys on the
remote control (numbers consisting of two figures must be
keyed in
w ith in 2 seco n ds).
- The music stops and a moment later the selected track
begins to play.
You can also select the number by using TRACK W or !◄ TRACK.
SELECTING ANOTHER INDEX NUMBER DURING PLAY
(~ INDEX +)
NOTE!
Index numbers are not indicated specifically on the display.
If the parts of a track have index numbers, this will be
specified in the track list in the CD holder.
• Press INDEX + o r - INDEX (on the remote control) until the
required index number appears on the display.
- The music stops and a moment later the selected index
number begins to play.
E F FO F : will light up if the index number selected does not
exist. Play will then start again at the beginning of the current
track.
STARTING WITH A PARTICULAR TRACK (0-9)
• Key in the required number using the 0-9 digit keys on the
remote control (numbers consisting of two figures must be
keyed in
w ith in 2 seco n ds).
- Play starts from the selected track.
You can also select the number by using TRACK ► ! or
!◄ TRACK and then pressing PLAY/REPLAY.
STARTING WITH A PARTICULAR INDEX NUMBER
(STOP/CP, !◄ TRACK W, - INDEX + and PLAY/REPLAY)
• Press STOP/CP.
• Select the track number you wish to start with using
TRACK H or !◄ TRACK.
• Then press INDEX + or - INDEX (on the remote control)
until the desired index number appears on the display.
• Press PLAY/REPLAY again.
- Play starts from the selected index number.
E R R O R will light up if you select a non-existent index number.
Play then starts at the beginning of the selected track.
S E L E C T T R R C K will light up if you have not selected a track
number first.
SCANNING A CD (SCAN)
• Press SCAN before or during play.
- If the CD compartment was open, it will now close.
- SCAN lights up and the first 10 seconds of each track are
played in turn.
- 10 seconds are counted down each time under REM(aining)
TRACK TIME.
- S l HN lights up before each new track.
• When the player reaches a track which you wish to hear in
full, press SCAN again or PLAY/REPLAY.
PLAYING THE CD IN RANDOM ORDER (SHUFFLE)
• Press SHUFFLE before or during play.
- If the CD compartment was open, it will now close.
- SHUFFLE lights up and all the tracks are now played in a
random order.
- SHUFFLE lights up before each new track.
• Press SHUFFLE again if you wish to return to normal play.
If you press K TRACK, you will return to a track which has
already been played.
If you press TRACK ► !, you will select any one of the following
tracks.
If you press REPEAT tw ice, the tracks will be repeated in a
different order each time, although the first track played will
always be the same.
JS
.¡S
"oj
c
U1
SEARCHING FOR A PASSAGE DURING PLAY
SEARCH ► ► )_________________________________________
• Hold ◄ ◄ down to search backwards to the beginning.
• Hold ► ► down to search forwards to the end.
The searching speed is determined by how long a key is
pressed:
- the first 2 seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.
If you reach the end of the last track and release ► ► , play will
resume a few seconds before the end of the CD.
Fast search for a passage:
• Press FAST (on the remote control).
- FAST lights up.
• Press ◄ ◄ orI
REPEATING A PASSAGE (A ► B) * •
• During play press A ► B (on the remote control) at the
required starting point.
- A — lights up.
• Press A ► B again at the required stopping point.
- A B lights up.
- The passage between points A and B will now be replayed
continuously.
• Press A ► B again if you wish to return to normal play.
To find the starting and stopping points quickly, you can use
the ◄ ◄ SEARCH ► ► keys.
At this search speed no sound is audible.