Operation (id, 7 prog(ramme), 9 cancel – Philips CD951 User Manual
Page 5: 12 !◄ tracks, 13 stop/cp, 14 play/replay, Inställätioisl
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTÄLLÄTIOISl
OPERATION (ID
FITTING A MAINS PLUG (U.K. only)
FRONT OF PLAYER
This apparatus is fitted with an approved moulded 13 Amp plug.
To change a fuse in this type of plug proceed as follows;
• Remove fuse cover and fuse.
• Fix new fuse which should be a BS1362 5A, A.S.T.A. or
BSI approved type.
• Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5A.
If a plug without a fuse is used, the fuse at the distribution board
should not be greater than 5A.
NOTE
T he severed p lu g m ust b e d ispo sed to avo id a p ossible
sh o ck h azard sho u ld it b e in serted into a 13A socket
elsew here.
HOW TO CONNECT A PLUG
The wires in the mains lead are coloured in accordance with
the following code:
BLUE -'NEUTRAL' ('N')
BROWN - 'LIVE' CL')
As these colours may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
• The BLUE wire must be connected to the terminal which is
marked with the letter 'N' or coloured BLACK.
• The BROWN wire must be connected to the terminal which
is marked with the letter 'L' or coloured RED.
• Do nof connect either wires to the earth terminal in the plug
which is marked by the letter 'E' or by the safety earth
symbol or coloured green or green-and-yellow.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply over
the two wires.
1
POWER STANDBY/OFF - Switching on and off.
2
l(nfra) R{ed) SENSOR- Receives the signals from the
remote control.
3 Display - Informs you about the functioning of the player.
4 OPEN/CLOSE -
Opening and closing the CD compartment.
5 PHONES - Connecting headphones.
6 LEVEL - Adjusting the volume when listening with headphones.
7 PROG(ramme)
-
Opening and closing the memory when compiling a programme.
-
Storing a programme in the FTS memory.
The P button on the remote control has the same function.
8
REVIEW
- Checking a programme.
9 CANCEL
-
Erasing track numbers from a programme.
-
Erasing favourite track selections and names from the FTS
memory.
The C button on the remote control has the same function.
10 SHUFFLE
- Playing in random order.
11
SCAN - Automatically playing the beginning of each track.
12 !◄ TRACKS
-
Selecting another track during play.
-
Selecting a track to start play with.
13 STOP/CP
-
Stopping play.
-
Erasing a programme (CP = Clear Programme).
14 PLAY/REPLAY
-
Starting play.
-
Returning to the beginning of a track.
15
PAUSE - Interrupting play.
16
◄ ◄ SEARCH ► ► - Fast search to a particular passage
during play.
17
REPEAT - Repeating play.
18
FTS - Activating the FTS memory (FTS = Favourite Track
Selection).
19
TIME - Selecting the time information you want to see.
20
DISPLAY OFF - Switching the display on and off.
The red led above the button serves as on/off indication.