FloAire Modular Packaged Unit - Manual (Page 22)

22
2. Filters need to be cleaned and/or replaced quarterly, and more often in severe conditions.
Washable filters can be washed in warm soapy water. When re-installing filters, be sure to install
with the airflow in the correct direction as indicated on the filter.
3. Check for and remove debris that has settled around the base of the condenser. This will ensure
proper water drainage from the condenser.
Yearly
1. Inspect bearings for wear and deterioration. Replace if necessary.
2. Inspect belt wear and replace torn or worn belts.
3. Inspect bolts and set screws for tightness. Tighten as necessary.
4. Inspect motor for cleanliness. Clean exterior surfaces only. Remove dust and grease from the
motor housing to ensure proper motor cooling. Remove dirt and grease from the wheel and
housing to prevent imbalance and damage.