Flintec FAD-4 - Manual (Page 22)

DK 0199.37A1e.doc
DELTA
Danish Electronics,
Light & Acoustics
Venlighedsvej 4
2970 Hørsholm
Denmark
Tel. (+45) 72 19 40 00
Fax (+45) 72 19 40 01
www.delta.dk
VAT DK 12275110
ADDITION No. DK 0199.37/1
to
CERTIFICATE
of
EU TYPE-APPROVAL
No. DK 0199.37
of
FT-01 / FT-02 / FT-03 / FT-04 / FAD-1 / FAD-4 / FDT-A/B
NON-AUTOMATIC WEIGHING INSTRUMENT
Issued by DELTA Danish Electronics, Light & Acoustics
EU - Notified Body No. 0199
In accordance with the requirements of the non-automatic weighing instruments regulation
No. 560 of 23 June 1992 which implements, in Denmark, Council Directive 90/384/EEC.
Issued to Flintec GmbH
Bemannsbruch 9
74909 Meckesheim
Germany
In respect of Non-automatic weighing instrument designated
FT-01 / FT-02 / FT-03 / FT-04 / FAD-1 / FAD-4 / FDT-A/B
with variants of modules.
Accuracy class III
Maximum capacity, Max: From 1 kg up to 99,000 kg
Verification scale interval: e = Max / n
Maximum number of verification scale intervals: n = 10000
(however dependent on environment and the composition
of the modules).
Variants of modules and conditions for the composition
of the modules are set out in the ANNEX.
The conformity with the essential requirements in annex 1 of the Directive is met.
Note: This addition is a revised edition, which replaces the certificate
No. DK 0199.37.
The principal characteristics and approval conditions are set out in the descriptive
ANNEX to this certificate.
The ANNEX comprises 30 pages.
Issued on 2002-03-08
Valid until 2011-07-11 Signatory: P. Bengtsen