FingerTec Hardware Frameless glass door - Manual (Page 4)

Copyright 2006 by FingerTec Worldwide Ltd. All rights reserved. LAST UPDATE 29 MAY 2006
INSTALLATION ON A GLASS DOOR
(WITHOUT WOODEN FRAME)
Alternative 2
Build two separate stands on both inner side and outerside of the door to mount
the FingerTec
®
reader, wiring and other accessories.
You may also build 2 stands, instead of using the wooden panel. The stand can
be made of a hollow metal.
The stand is located outdoor.
The other accessories such as push release button
and emergency break glass are mounted on the other
stand. Which will be located in the inner side of
the door.
4