FingerTec Webserver - Manual (Page 7)

Get the APN from your service provider.
Get the Username from your service pro-
vider.
Get the Password from your service pro-
vider.
You must insert *99***1# in the column
Dial Number. This is a fixed value for Dial Number
Depends on your server address.
Recommended to set as 8080. You
can use other ports as long as the port number does
not clash with other applications.
Installation of GRPS tool into the terminal
You need to switch on the GPRS function first in the terminal before proceeding to use the
Webserver in the PC.
Connect to the FingerTec terminal
via LAN cable. Next, insert the IP
address of the terminal and click
to start.
If connection to the terminal is successful, the information will be displayed at the window
below the tool. Check the information to make sure that you are connecting to the correct
terminal. Click on the GPRS Setting Tab on the tool.
Tick the checkbox to ‘Update GPRS Setting so you can key in the details.
Below are a number of settings that you need to fill in first before proceeding to the next
step.