FingerTec TA200 Plus Installation Guide - Manual (Page 2)

D OO R LOCK TIM ER
note:
All Accessories are offered at
http://accessory.fingertec.com
Step 5
Finalizing the installation
1. Check that all cable connections are done correctly.
2. Attach the terminal to the corresponding back plates, tighten
the screws to secure the terminal on the wall
3. Switch on the power to the terminal.
4. Start using the terminal.
Other Accessories
AdapTec AC
The AdapTec AC is a 12VDC power supply inclusive of a 110~240VAC
switching linear power. The AdapTec supplies 12VDC power to the
FingerTec terminal and door lock system as well as charges a 12VDC
7.0Ah backup battery simultaneously. During an event of a power
failure, the back up battery automatically provides power to the
terminal and maintains the door lock system. The AdapTec AC also
prevents a secured door from being opened if it has been tampered
with.
Mini UPS
Mini UPS 12VDC is a mini portable backup power
supply with 12VDC output, supplying 12VDC
power for FingerTec Door Access & Time Attend-
ance terminals.
Enclosures
FingerTec offers enclosures to protect the terminals from being med-
dled with by unauthorized persons.
Flexi Kit
A foldable stand for FingerTec products, simplifies installation and
presentable. (Example on Step 2, B.)
Appendix I
Terminal Dimensions and Measurements
Front View of TA200 Plus