FingerTec TA100C Installation Guide - Manual (Page 2)

D OO R LOCK TIM ER
note:
All Accessories are offered at
http://accessory.fingertec.com
Step 5
Finalizing the installation
1. Check that all cable connections are done correctly.
2. Attach the terminal to the corresponding back plates, tighten
the screws to secure the terminal on the wall
3. Switch on the power to the terminal.
4. Start using the terminal.
Other Accessories
AdapTec TA
The AdapTec TA is a 5VDC power supply inclusive of a 110~240VAC
switching linear power. The AdapTec provides 5VDC power to the Fin-
gerTec terminal and charges a 12VDC 7.0Ah backup battery simulta-
neously. During an event of a power failure, the back up battery will
automatically provides power to the terminal.
Mini UPS
Mini UPS 5VDC is a mini portable backup power
supply with 5VDC output, supplying 5VDC power
for FingerTec Time Attendance terminals.
Enclosures
FingerTec offers enclosures to protect the terminals from being med-
dled with by unauthorized persons.
Flexi Kit
A foldable stand for FingerTec products, simplifies installation and
presentable. (Example on Step 2, B.)
Appendix I
Terminal Dimensions and Measurements
Front View of TA100C Series