Compaq ProLiant Interconnect Switch - Manual (Page 75)

Configuring the GbE Interconnect Switch Using the Console Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide 3-39
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Configuring Port Security
To configure security for a specified port or range of ports on the GbE Interconnect Switch:
1. Highlight Configure Port Security on the Configuration menu.
2. Press the Enter key. The following screen is displayed.
3. Toggle the View Ports field to the range that you want.
4. Type the range of ports in the Configure Port fields.
5. Toggle the Admin State field to Enabled.
6. Type the maximum number of addresses in the Max. Addr. field.
7. Toggle to the mode that you want in the Mode field.
8. Highlight APPLY and press the Enter key.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.