Compaq ProLiant Interconnect Switch - Manual (Page 45)

Configuring the GbE Interconnect Switch Using the Console Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide 3-9
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Deleting a User Account
To prevent accidental deletion of all of the users with Root privilege, the console interface
does not allow you delete the current logged-on user.
To delete a user account:
1. Highlight User Accounts Management on the main menu.
2. Press the Enter key. The Setup User Accounts screen displays a list of all current user
accounts.
3. Toggle the Action field to select Delete.
4. Type the user name in the Username field.
5. Type the user’s password for the account you want to delete in the New Password field.
6. Highlight APPLY and press the Enter key.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.
Configuring the GbE Interconnect Switch
This section describes options found under the Configuration menu.
Configuring the IP Address
Some settings must be entered to allow the GbE Interconnect Switch to be managed from an
SNMP-based Network Management System, such as SNMP v1, or to be able to access the
GbE Interconnect Switch using the Telnet protocol.