Configuring class of traffic – Compaq ProLiant Interconnect Switch User Manual

Page 74

Text mode
Original mode

Configuring the GbE Interconnect Switch Using the Console Management Interface

3-38

Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide

COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM

Configuring Class of Traffic

To configure traffic class:

1. Highlight

Configure Traffic of Class on the Configure Class of Service, Default

Priority and Traffic Class menu.

2. Press

the

Enter key. The following screen is displayed.

3. Toggle

the

Priority fields to set the traffic class for the eight levels of priority for the

GbE Interconnect Switch. Class values are from 0 to 3.

4. Highlight

APPLY and press the Enter key.

NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.