Emerson Radio ES8 - Manual (Page 9)

8
TUNING TO A PRESET STATION
Select the desired station preset number by pressing the MEM. UP/REPEAT
button.
ANTENNA
For FM reception there is a built-in 3 ft FM antenna wire at the rear of the unit.
Unravel the wire and move it around to obtain the best reception. For AM reception
the signals are picked up through the built-in ferrite antenna. You may have to
move the unit slightly to obtain the best reception.
CLOCK SETTING
1. Switch the unit to Standby mode by pressing the POWER button.
2. Press the MEMORY/PROGRAM button.
The hour digits will flash in the display.
3. Use the / buttons to set the required
hour. Be sure to set correctly for AM or
PM.
4. Press the MEMORY/PROGRAM button
again. The Hour is now set and the Minute
digits start to flash in the display.
5. Using the / buttons to set the
required minute.
6. Press the MEMORY/PROGRAM button
again. The Minutes are now set and the
clock will start.
NOTE:
• Clock time is only retained while the unit is plugged into the AC outlet. In the
event of a power failure the clock will need to be reset when the power supply
resumes.
• Clock time is only shown when unit is in Standby mode.
:
AM
:
PM
:
PM
ES8_ib.p65 8/10/01, AM 11:01 8