Emerson Radio ES8 - Manual (Page 12)

11
DISC ERRORS
• This compact disc player has built-in error compensation circuits to correct for
minor defects in a disc. There are limits, however, to the amount of correction
available.
• In some cases, the CD player may skip some tracks, or parts of tracks, on a disc
during disc play. This problem may be caused by defects (such as scratches)
in the disc being played, which are too large for the error compensation circuits
to handle. If you encounter this problem, check the CD player's operation as
follows, before having the unit serviced:
Play a new disc. If the CD player operates normally, the skipping problem is
probably due to a defective disc.
TO STOP A CD BEFORE THE DISC ENDS
1. Press the Stop button. Disc play will stop, and the display will show the total
number of tracks.
2. To temporarily stop disc play (Pause mode), press the Play/Pause button.
Disc play will stop at the current play position. The display and the track playing
time will flash.
3. To resume disc play, press the Play/Pause
button again.
TRACK SKIP
Starting disc play from the beginning of a particular track.
Press the Forward
or Reverse Skip Track buttons to select the desired
track. The number of the selected track will be shown on the CD display. Press the
Play/Pause
button to start play.
To skip to the next track.
For example, to skip ahead to the beginning of track 5 while track 4 is playing.
1. Press the Forward Skip track button once. Disc play will resume at the
beginning of track 5.
:
POP
TRACK
1 2 3 4
5 6 7 8
9 10 OVER
ES8_ib.p65 8/10/01, AM 11:01 11