Emerson Radio ES8 - Manual (Page 14)

13
3. The disc will then begin playing through to the end of the last track. At which point
it will automatically return to the beginning of the first track. This will continue
until the Stop button is pressed.
4. If the MEM. UP/REPEAT button is pressed twice more, the “REPEAT” indicator
will disappears and repeat play will end. Normal disc play will resume from that
point.
5. When the last track has finished playing, the CD play will Stop.
Repeat disc play of one of the tracks
1. Select the desired track by pressing the Forward
or Reverse Skip track
buttons. The track will be shown in the display.
2. Press the MEM. UP/REPEAT button twice.
The “REPEAT” indicator flashes in the
display.
3. Press the Play/Pause button.
4. The selected track will then begin playing through to its end. At which point it will
automatically return to the beginning of that track. This will continue until the
Stop button is pressed.
5. If the MEM. UP/REPEAT button is pressed once more, the “REPEAT”
indicator will disappear and, repeat play will end. Normal disc play will
resume from that point.
6. When the last track has finished playing, the CD player will then Stop.
PROGRAMMED DISC PLAY
• It is possible to program the tracks you wish to play in a sequence of your choice.
It is not possible to enter program a disc during playback. Press the Stop
button first, then follow the instructions below.
• It is easier to use the remote control for the following settings, however you may
also use the controls on the main unit if desired.
:
POP
TRACK
1 2 3 4
5 6 7 8
9 10 OVER
REPEAT
ES8_ib.p65 8/10/01, AM 11:01 13