EDCO 2GC-NG-11H - Manual (Page 7)

E-2ECGCNG-I-0513
Printed in USA
©2013
Page 7
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone (301) 663-1600 • 1-800-638-3326
Fax (301) 663-1607 • 1-800-447-3326
Website: www.edcoinc.com • Email: [email protected]
Return level lock to the locked position.
Lean back slightly on the handle to get
the tools off of the surface and start the
machine. Lower the machine to the sur-
face and do a short touch pass on the
concrete.
You are looking for two complete circles.
If you see partial circles repeat the process until complete circles are achieved.