Digilent 410-201P-KIT - Manual (Page 2)

PmodRF2 Reference Manual
www.digilentinc.com page 2 of 2
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
Power Supply
The PmodRF2 is designed to work with
Digilent microcontroller boards that have 12-
pin header connectors.
The PmodRF2 requires a 2.7V-3.6V supply
voltage. A 3.3V power supply voltage is
available on all Digilent system boards and is
provided as part of the 12-wire Pmod interface
standard.
Digilent system boards with Pmod interface
connectors allow jumper selection of the power
supply voltage to be provided to the Pmod.
WARNING: Ensure that the system board is
jumpered to provide 3.3V to the module before
applying power to the board.
For more information on the MRF24J40, see
the MRF24J40 datasheet at the Microchip web
site.