Digilent 410-219P User Manual
Page 2
PmodIOXP Reference Manual
www.digilentinc.com
page 2 of 2
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
Open-Drain Interrupt Output
The interrupt pin can be configured to trigger
on an event, GPI level, FIFO overflow, logic
function output, and on keyboard lock. The
corresponding bit in the interrupt enable
register must be set in order for the interrupt to
be set. Specific registers related to the
interrupts are described in the ADP5589
datasheet.
Reset Pin
The PmodIOXP has an active-low reset pin
that can be used to reset the ADP5589 to
default settings.
General Purpose I/O (GPIO)
The PmodIOXP has 19 GPIOs that can be
configured a number of ways. The GPIOs can
be set as either input or output, set to decode a
keypad matrix, or implement logic functions.
The functionality of the IOs can be set using
the configuration registers which are described
in the ADP5589 datasheet.
Connector J5
Pin Signal
Description
1
INT
Interrupt Open Drain Output
2
GND
Power Supply Ground
Connector J6
Pin Signal
Description
1
RST
Reset pin
2
GND
Power Supply Ground
Connector J4 - GPIOs
Pin Signal
Description
1
C8
Column 8 (GPIO 17)
2
GND
Power Supply Ground
3
C9
Column 9 (GPIO 18)
4
GND
Power Supply Ground
5
C10
Column 10 (GPIO 19)
6
GND
Power Supply Ground
Connector J1 - GPIOs
Pin Signal
Description
1
R0
Row 0 (GPIO 1)
2
R1
Row 1 (GPIO 2)
3
R2
Row 2 (GPIO 3)
4
R3
Row 3 (GPIO 4)
5
GND
Power Supply Ground
6
VCC
Power Supply(3.3V)
7
C0
Column 0 (GPIO 9)
8
C1
Column 1 (GPIO 10)
9
C2
Column 2 (GPIO 11)
10
C3
Column 3 (GPIO 12)
11
GND
Power Supply Ground
12
VCC
Power Supply(3.3V)
Connector J2 - GPIOs
Pin
Signal
Description
1
R4
Row 4 (GPIO 5)
2
R5
Row 5 (GPIO 6)
3
R6
Row 6 (GPIO 7)
4
R7
Row 7 (GPIO 8)
5
GND
Power Supply Ground
6
VCC
Power Supply(3.3V)
7
C4
Column 4 (GPIO 13)
8
C5
Column 5 (GPIO 14)
9
C6
Column 6 (GPIO 15)
10
C7
Column 7 (GPIO 16)
11
GND
Power Supply Ground
12
VCC
Power Supply(3.3V)