D.A.S. Audio Aero - Manual (Page 30)

AERO-38 boxes can be easily transported in
groups of four when stacked on the PL-48S platform.
This arrangement is also useful and saves time when
setting up a cluster. Let us see what would the
procedure be when flying a six box cluster.
After the AX-AERO48 grid has been
attached to the motors, it should be lifted at about
1.8m (5.5 ft) from the ground. Now the platform
containing the first three stacked AERO-38 boxes can
be rolled under the grid.
In order to attach the box on top to the grid,
front guides G1A48 and rear guides G2A48 must be
swung (2) and inserted into the AX-AERO48 grid
receiving points. Once this has been done, detach the
6 safety pins from their receptacles and secure the
box to the grid.
Once G1A48, G2A48 of the top cabinet have
been secured (3) to the grid, rotate
4
5 . See next page.
the G2A48 pieces
( ), fit them into the upper box rigging hardware and
secure them with the safety pins ( )
Whenever a safety pin is inserted, it is
always advisable to make sure it has been correctly
locked by pulling outward.
4.6 ASSEMBLING A CLUSTER
USING THE PL-48S PLATFORM
70
Aero-38
Manual del usuario/ User´s manual
2
2