D.A.S. Audio Aero - Manual (Page 28)

Safety pins can now be inserted (14). In this
example, the set up angle between boxes 3 and 4 is
4.8º.
The procedure is the same for the next
boxes. The cluster must be lowered again (15) until
the safety pins of box 3 are loose. Remove the pins
(16) so the G2A48 rear guides return to their stored
position (17). Insert the safety pins into the holes (18)
that determine the angle previously selected for
stacking. Repeat the same procedure with box
number 1: lower the cluster (19), free the rear guides
G2A48 (20 & 21) and select the angle.
It is important to check that pins cannot be
removed by pulling outward and that they have been
inserted in the G2A48 hole instead of the guide slot.
Otherwise the box would not remain in the expected
angle.
68
Aero-38
Manual del usuario/ User´s manual
14
4.8º
13
15
17
16
19
4.8º
3.2º
18
20
21