D.A.S. Audio LX-218RA User Manual

Page 9

DAS Audio offers the

and

self powered cabinets, for applications requiring
precise control of the vertical coverage and high
sound pressure levels. The

is a three way

system which integrates two 12” low frequency
units, two 10” mid range devices and one
compression driver coupled to the SERPIS-38 high
frequency plane wave adaptor insuring coherent
high frequency summing and the generation of a
flat, isophasic wave front. When increased sound
pressure level in the low frequency range is
required, the system can be used in conjunction
with

subwoofer units.

aero 38A

LX-218RA

aero 38A

LX-218RA

aero 38A

LX-218RA

aero 38A

LX-218RA

aero 38A

LX-218RA

The system is ideal for applications such as

large-scale

outdoor/indoor

events

arenas,

stadiums or theaters.

The loudspeakers used in the system feature

advanced technologies; new TAF (total air flow)
cooling systems, Neodymium magnetic circuits
which allow for important weight reductions,
titanium

diaphragms

for

the

high

frequency

sections,

and

low-mid

frequency

cones

manufactured using crossed fibers and elastic
suspension that provide exceptional stability in the
vertical plane.

Both units are manufactured using 15/18 mm

Finnish Birch plywood. The

enclosure

shape is trapezoidal with 5º angles. The
enclosures are rectangular.

The

and

systems incorporate

captive rigging hardware which is compatible with
one another and designed to provide a fast, simple
and safe rigging by means of quick release safety
pins. Splay angles can be changed from 0º to 3.2º
in 0.8º increments and from 3.2º to 9.6º in 1.6º
increments.

To facilitate transport, the

units are

equipped with a

front dolly panel attached

by means of the rigging hardware. The front dolly
panel is useful when rigging systems. The

a metal dolly for vertically stacking 3 to 4
units is available as an accessory. The
system incorporates a

dolly panel usefull

to transport the cabinet. The

, a metal dolly

platform for vertically stacking 3 to 4
units is available as an accessory.

PL-38

PL-48S

PL-LX218

PL-218S

SYSTEM DESCRIPTION

LINE DRAWINGS

Manual del Usuario

/ aero 38A & LX-218RA / User’s Manual

1380

316

595

aero 38A

LX-218RA

ALL DIMENSIONS IN MILIMETERS

1350

685

550

SOUND PRODUCTS

WARNING! DO NOT SUSPEND FROM THIS HANDLE

¡ATENCIÓN! NO CUELGUE LA CAJA DE ESTE ASA

SOUND PRODUCTS

WARNING! DO NOT SUSPEND FROM THIS HANDLE

¡ATENCIÓN! NO CUELGUE LA CAJA DE ESTE ASA

ALL DIMENSIONS IN MILIMETERS

The model

includes two

12”

cone transducer with 4” EFW voice coils and
Neodymium magnet assemblies in a bass-reflex
configuration.

Two

10”

speakers

arranged in a V shape, incorporating 3” EFW voice
coils, Neodymium magnet assemblies and TAF
cooling

system

are

used

for

mid-range

reproduction. High frequencies are handled by one

high frequency compression driver with 4”

EFW coil, Neodymium magnet and 1.5” exit
coupled to one

plane wave guide. The

plane wave adaptor also serves as a heat

sink for the compression driver. The
include two

18” cone transducers long

excursion

loudspeakers

with

enhanced

performance and optimized design.

aero 38A

12GNC

10LMN16

ND-10

Serpis 38

LX-218RA

18LX

Serpis 38

The

reproduces frequencies from 60

Hz. To combine the

with subwoofer units,

the

is recommended for ground stacking

and

the

recommended

when

subwoofers

are

flown.

The

subwoofers as well as the

´s include the

correct signal treatment and crossover points.
Using an external DSP will only be necessary to
adjust the delay between the

units and

the subwoofers used as there were be an overlap
of the frequencies between 60 Hz and 80 Hz.

aero 38A

LX-218A

LX-218

aero 38A

Manual del Usuario

/ aero 38A & LX-218RA / User’s Manual

This manual is related to the following products:

Aero 38A