D.A.S. Audio LX-218RA - Manual (Page 18)

C) Platforms and
PL-38 PL-LX218
aero 38A
LX-218RA
PL-LX218
The dolly panels facilitate transport of the
systems. They can also be used to
facilitate flying the systems. Each cover is attached
to the enclosure by using the flying hardware
attached to each box and is fixed with the quick
release safety pins. The
systems also
include one dolly panel per cabinet.
PL-38
D) and
PL-48S PL-218S
The platform is a valuable accesory
which allows up to 4 units to be
transported in a stacked position, ready to be
flown. The
Also, the is the platform indicated for
.
PL-48S
aero 38A
PL-218S
LX-218RA
PL-48S is made from steel and has 4
heavy duty casters with locking brakes.
PL-218S
PL-48S
The is joined to the last
cabinet using G1A48 and G2A48 included steel
guides and 6 quick release pins. The angle
depends on the hole of the rigging structures
where the pins are inserted, through the slots of
G2A48. The first
unit is joined to the
using its G1A and G2A included cam
links.
On the next page is a table with the angles
between both systems depending on the hole
where the quick release pin is being inserted.
AX-COMBO aero 38A
aero 28 AX-
COMBO
AX-COMBO
AX-COMBO
G1A48
Dimensions: 143x60x5cm (56.3x23.6x2in)
Weight: 16.5Kg (36.3 lbs)
G2A48
G1A48
G2A48
E)
AX-COMBO
The is a rigging adapter to be used
when units are needed to be flown under
units as dowfill systems.
AX-COMBO
aero 28
aero 38A
aero 38A
Maximum 6
units and 8 units can be flown from
this rigging grid. The includes front and
rear steel guides which permit variation of the
angle between it and the last
cabinet in
the cluster. Angles vary from 0.0º to 9.6º.
CA-
28A CA-28B
AX-COMBO
LX-218RA
PL-LX218
aero 38A
PL-38
EN
12 Manual del Usuario / aero 38A & LX-218RA / User’s Manual