D.A.S. Audio Aero 40A Rigging - Manual (Page 4)

4 Manual de Colgado / aero 40 / Rigging Manual
Three or four units groups are easy to transport
by truck as we will see in this section. We will also
see the preparation.
Remove the front PL-40 pushing the triggers at
the same time. Hold the carriage before acting
on the triggers. The triggers are situated on both
sides of the enclosure.
This will be the first enclosure that we will stack
onto the PL-40S.
If we look at the platform we will see the two
security pins on the sides (see figure).
These pins allow to hold the first enclosure to
the platform.
PL-40S
Side view of the PL-40S platform.
Front part of the
PL-40S platform.
Rear part of the
PL-40S platform.
Security pins on
the PL-40S platform side.
Security pins of the
PL-40S platform.
Front view of the PL-40S platform.
4 UNITS MOUNTING ON A PL-40S