Comtrol RocketPort 550 uPCI Windows NT - Manual (Page 2)

2
1. Before you begin
2. Installing Your controller hardware
3. Extracting the driver files to the PC’s hard disk
4. Installing the WinNT4 Device Driver
5. Un-installing the WinNT4 Device river
6. Cable Types
7. Technical Support
8. Specifications
9. Copyright and Trademarks
1. Before you begin
The Windows NT 4 device driver for the RocketPort 550 is supplied as a single self
extracting file. The driver supports the original RocketPort 550 range as well as the
recently introduced RocketPort 550 PCi Universal range.
The original RocketPort 550 PCi controller will be referred to as RocketPort 550
The RP550 PCi Universal controllers (referred to as Universal 550 within the setup program) can
be installed in PCi slots that support either 3.3V or 5V bus signals. The original
RocketPort 550 PCi range can only be installed in PCi slots that support 5V signalling.
The RocketPort 550 PCi Universal controller will be referred to as RocketPort 550
Universal
Prior to installing the Windows NT4 device driver, the driver files must be extracted to a
folder on your PC’s hard disk.. See section 3.